AIPMT Syllabus 2016 with Exam Pattern & PDF

Check AIPMT Syllabus 2016 with Exam Pattern: This page is dedicated to provide you syllabus of AIPMT 2016 Entrance Test. All India Pre-Medical Test commonly known as AIPMT 2016 is conducted every year for admission to MBBS BDS etc. Medical course. Those candidates who are preparing for AIPMT 2016 i.e. Medical course's Entrance exam May 2016 must start their preparation as the exam is near. AIPMT 2016 exam is likely to be conducted in May 2016. If they prepare well, then they can Qualify. And if they worked harder, then they might get better marks. AIPMT is one of the tough entrance tests of India. The candidates should prepare according to AIPMT Exam Syllabus 2016 given here for better preparation.
Also pdf of AIPMT 2016 Syllabus is also provided for offline viewing. This syllabus covers AIPMT 2016 syllabus of Physics, Chemistry & Biology.


Download AIPMT Syllabus PDF here
AIPMT Exam pattern 2016:

  • The question paper will have 180 Multiple Choice Questions based on Physics, Chemistry & Biology (Botany & Zoology). 
  • Of these, 45 questions will be asked from each section of Physics, Chemistry, Botany and Zoology. 
  • AIPMT 2016 exam will be of 720 marks. 
  • For each correct answer, candidates will be awarded 4 marks
  • Negative marking of 1 mark will be applicable.  
  • AIPMT 2016 Exam will be conducted from 10:00 Am to 01:00 PM and it will be of 3 hours.
  • AIPMT 2016 Question Booklet will be of four sets and will be avialable in English as well as Hindi language. 
  • Candidates can choose their preferred language of paper in the application form.

AIPMT Qualifying Marks:
General Category: 50%
Reserved Category (OBC, SC & ST): 40%
General Category - PH: 45%
Reserved Category -PH: 40%

1. PHYSICS - AIPMT Syllabus 2016 of Physics
UNIT I: Physical World and Measurement
Physics: Scope and excitement; nature of physical laws; Physics, technology and society.
Need for measurement: Units of measurement; systems of units; SI units, fundamental and derived units. Length, mass
and time measurements; accuracy and precision of measuring instruments; errors in measurement; significant figures.
Dimensions of physical quantities, dimensional analysis and its applications.
UNIT II: Kinematics
Frame of reference, Motion in a straight line; Position-time graph, speed and velocity. Uniform and non-uniform motion,
average speed and instantaneous velocity. Uniformly accelerated motion, velocity-time and position-time graphs, for
uniformly accelerated motion (graphical treatment).
Elementary concepts of differentiation and integration for describing motion. Scalar and vector quantities: Position and
displacement vectors, general vectors, general vectors and notation, equality of vectors, multiplication of vectors by a
real number; addition and subtraction of vectors. Relative velocity.
Unit vectors. Resolution of a vector in a plane-rectangular components.
Scalar and Vector products of Vectors. Motion in a plane. Cases of uniform velocity and uniform acceleration- projectile
motion. Uniform circular motion.
UNIT III: Laws of Motion
Intuitive concept of force. Inertia, Newton’s first law of motion; momentum and Newton’s second law of motion;
impulse; Newton’s third law of motion. Law of conservation of linear momentum and its applications.
Equilibrium of concurrent forces. Static and Kinetic friction, laws of friction, rolling friction, lubrication.
Dynamics of uniform circular motion. Centripetal force, examples of circular motion (vehicle on level circular road,
vehicle on banked road).
UNIT IV: Work, Energy and Power
Work done by a constant force and variable force; kinetic energy, work-energy theorem, power.
Notion of potential energy, potential energy of a spring, conservative forces; conservation of mechanical energy (kinetic
and potential energies); non-conservative forces; motion in a vertical circle, elastic and inelastic collisions in one and two dimensions.
UNIT V: Motion of System of Particles and Rigid Body
Centre of mass of a two-particle system, momentum conservation and centre of mass motion. Centre of mass of a rigid
body; centre of mass of uniform rod.
Moment of a force,-torque, angular momentum, conservation of angular momentum with some examples.
Equilibrium of rigid bodies, rigid body rotation and equation of rotational motion, comparison of linear and rotational
motions; moment of inertia, radius of gyration. Values of M.I. for simple geometrical objects (no derivation). Statement
of parallel and perpendicular axes theorems and their applications.
UNIT VI: Gravitation
Kepler’s laws of planetary motion. The universal law of gravitation. Acceleration due to gravity and its variation with
altitude and depth.
Gravitational potential energy; gravitational potential. Escape velocity, orbital velocity of a satellite. Geostationary
AIPMT 2016 Syllabus

UNIT VII: Properties of Bulk Matter
Elastic behavior, Stress-strain relationship. Hooke’s law, Young’s modulus, bulk modulus, shear, modulus of rigidity,
poisson’s ratio; elastic energy.
Viscosity, Stokes’ law, terminal velocity, Reynold’s number, streamline and turbulent flow. Critical velocity, Bernoulli’s
theorem and its applications.
Surface energy and surface tension, angle of contact, excess of pressure, application of surface tension ideas to drops,
bubbles and capillary rise.
Heat, temperature, thermal expansion; thermal expansion of solids, liquids, and gases. Anomalous expansion. Specific
heat capacity: Cp, Cv- calorimetry; change of state – latent heat.
Heat transfer- conduction and thermal conductivity, convection and radiation. Qualitative ideas of Black Body Radiation,
Wein’s displacement law, and Green House effect.
Newton’s law of cooling and Stefan’s law.
UNIT VIII: Thermodynamics
Thermal equilibrium and definition of temperature (zeroth law of Thermodynamics). Heat, work and internal energy.
First law of thermodynamics. Isothermal and adiabatic processes.
Second law of the thermodynamics: Reversible and irreversible processes. Heat engines and refrigerators.
UNIT IX: Behaviour of Perfect Gas and Kinetic Theory
Equation of state of a perfect gas, work done on compressing a gas.
Kinetic theory of gases: Assumptions, concept of pressure. Kinetic energy and temperature; degrees of freedom, law of
equipartition of energy (statement only) and application to specific heat capacities of gases; concept of mean free path.
UNIT X: Oscillations and Waves
Periodic motion-period, frequency, displacement as a function of time. Periodic functions. Simple harmonic
motion(SHM) and its equation; phase; oscillations of a spring-restoring force and force constant; energy in SHM –Kinetic
and potential energies; simple pendulum-derivation of expression for its time period; free, forced and damped
oscillations (qualitative ideas only), resonance.
Wave motion. Longitudinal and transverse waves, speed of wave motion. Displacement relation for a progressive wave.
Principle of superposition of waves, reflection of waves, standing waves in strings and organ pipes, fundamental mode
and harmonics. Beats. Doppler effect.
UNIT I: Electrostatics
Electric charges and their conservation. Coulomb’s law-force between two point charges, forces between multiple
charges; superposition principle and continuous charge distribution.
Electric field, electric field due to a point charge, electric field lines; electric dipole, electric field due to a dipole; torque
on a dipole in a uniform electric field.
Electric flux, statement of Gauss’s theorem and its applications to find field due to infinitely long straight wire, uniformly
charged infinite plane sheet and uniformly charged thin spherical shell (field inside and outside)
Electric potential, potential difference, electric potential due to a point charge, a dipole and system of charges:
equipotential surfaces, electrical potential energy of a system of two point charges and of electric diploes in an
electrostatic field.
Conductors and insulators, free charges and bound charges inside a conductor. Dielectrics and electric polarization,
capacitors and capacitance, combination of capacitors in series and in parallel, capacitance of a parallel plate capacitor
with and without dielectric medium between the plates, energy stored in a capacitor, Van de Graaff generator.
UNIT II: Current Electricity
Electric current, flow of electric charges in a metallic conductor, drift velocity and mobility, and their relation with electric
current; Ohm’s law, electrical resistance, V-I characteristics (liner and non-linear), electrical energy and power, electrical
resistivity and conductivity.
Carbon resistors, colour code for carbon resistors; series and parallel combinations of resistors; temperature dependence
of resistance.
Internal resistance of a cell, potential difference and emf of a cell, combination of cells in series and in parallel.
Kirchhoff’s laws and simple applications. Wheatstone bridge, metre bridge.
Potentiometer-principle and applications to measure potential difference, and for comparing emf of two cells;
measurement of internal resistance of a cell.
UNIT III: Magnetic Effects of Current and Magnetism
Concept of magnetic field, Oersted’s experiment. Biot-Savart law and its application to current carrying circular loop.
Ampere’s law and its applications to infinitely long straight wire, straight and toroidal solenoids. Force on a moving
charge in uniform magnetic and electric fields. Cyclotron.
Force on a current-carrying conductor in a uniform magnetic field. Force between two parallel current-carrying
conductors-definition of ampere. Torque experienced by a current loop in a magnetic field; moving coil galvanometer-its
current sensitivity and conversion to ammeter and voltmeter.
Current loop as a magnetic dipole and its magnetic dipole moment. Magnetic dipole moment of a revolving electron.
Magnetic field intensity due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis. Torque on a
magnetic dipole (bar magnet) in a uniform magnetic field; bar magnet as an equivalent solenoid, magnetic field lines;
Earth’s magnetic field and magnetic elements.
Para-, dia-and ferro-magnetic substances, with examples.
Electromagnetic and factors affecting their strengths. Permanent magnets.
UNIT IV: Electromagnetic Induction and Alternating Currents
Electromagnetic induction; Faraday’s law, induced emf and current; Lenz’s Law, Eddy currents. Self and mutual
Alternating currents, peak and rms value of alternating current/ voltage; reactance and impedance; LC oscillations
(qualitative treatment only), LCR series circuit, resonance; power in AC circuits, wattles current.
AC generator and transformer.
UNIT V: Electromagnetic Waves
Need for displacement current.
Electromagnetic waves and their characteristics (qualitative ideas only). Transverse nature of electromagnetic waves.
Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, x-rays, gamma rays) including
elementary facts about their uses.
UNIT VI: Optics
Reflection of light, spherical mirrors, mirror formula. Refraction of light, total internal reflection and its applications
optical fibres, refraction at spherical surfaces, lenses, thin lens formula, lens-maker’s formula. Magnification, power of a
lens, combination of thin lenses in contact combination of a lens and a mirror. Refraction and dispersion of light through
a prism.
Scattering of light- blue colour of the sky and reddish appearance of the sun at sunrise and sunset.
Optical instruments: Human eye, image formation and accommodation, correction of eye defects (myopia and
hypermetropia) using lenses.
Microscopes and astronomical telescopes (reflecting and refracting) and their magnifying powers.
Wave optics: Wavefront and Huygens’ principle, reflection and refraction of plane wave at a plane surface using
Proof of laws of reflection and refraction using Huygens’ principle.
Interference, Young’s double hole experiment and expression for fringe width, coherent sources and sustained
interference of light.
Diffraction due to a single slit, width of central maximum.
Resolving power of microscopes and astronomical telescopes. Polarisation, plane polarized light; Brewster’s law, uses of
plane polarized light and Polaroids.
UNIT VII: Dual Nature of Matter and Radiation
Photoelectric effect, Hertz and Lenard’s observations; Einstein’s photoelectric equation- particle nature of light.
Matter waves- wave nature of particles, de Broglie relation. Davisson-Germer experiment (experimental details should
be omitted; only conclusion should be explained).
UNIT VIII: Atoms and Nuclei
Alpha- particle scattering experiments; Rutherford’s model of atom; Bohr model, energy levels, hydrogen spectrum.
Composition and size of nucleus, atomic masses, isotopes, isobars; isotones.
Radioactivity- alpha, beta and gamma particles/ rays and their properties decay law. Mass-energy relation, mass defect;
binding energy per nucleon and its variation with mass number, nuclear fission and fusion.
UNIT IX: Electronic Devices
Energy bands in solids (qualitative ideas only), conductors, insulators and semiconductors; semiconductor diode- I-V
characteristics in forward and reverse bias, diode as a rectifier; I-V characteristics of LED, photodiode, solar cell, and
Zener diode; Zener diode as a voltage regulator. Junction transistor, transistor action, characteristics of a transistor;
transistor as an amplifier (common emitter configuration) and oscillator. Logic gates (OR, AND, NOT, NAND and NOR).
Transistor as a switch.

2. Chemistry - AIPMT Syllabus 2016 of Chemistry
UNIT I: Some Basic Concepts of Chemistry
General Introduction: Important and scope of chemistry.
Laws of chemical combination, Dalton’s atomic theory: concept of elements, atoms and molecules.
Atomic and molecular masses. Mole concept and molar mass; percentage composition and empirical and molecular
formula; chemical reactions, stoichiometry and calculations based on stoichiometry.
UNIT II: Structure of Atom
Atomic number, isotopes and isobars. Concept of shells and subshells, dual nature of matter and light, de Broglie’s
relationship, Heisenberg uncertainty principle, concept of orbital, quantum numbers, shapes of s,p and d orbitals, rules
for filling electrons in orbitals- Aufbau principle, Pauli exclusion principles and Hund’s rule, electronic configuration of
atoms, stability of half filled and completely filled orbitals.
UNIT III: Classification of Elements and Periodicity in Properties
Modern periodic law and long form of periodic table, periodic trends in properties of elements- atomic radii, ionic radii,
ionization enthalpy, electron gain enthalpy, electronegativity, valence.
UNIT IV: Chemical Bonding and Molecular Structure
Valence electrons, ionic bond, covalent bond, bond parameters, Lewis structure, polar character of covalent bond,
valence bond theory, resonance, geometry of molecules, VSEPR theory, concept of hybridization involving s, p and d
orbitals and shapes of some simple molecules, molecular orbital theory of homonuclear diatomic molecules (qualitative
idea only). Hydrogen bond.
UNITV: States of Matter: Gases and Liquids
Three states of matter, intermolecular interactions, types of bonding, melting and boiling points, role of gas laws of
elucidating the concept of the molecule, Boyle’s law, Charle’s law, Gay Lussac’s law, Avogadro’s law, ideal behaviour of
gases, empirical derivation of gas equation. Avogadro number, ideal gas equation. Kinetic energy and molecular speeds
(elementary idea), deviation from ideal behaviour, liquefaction of gases, critical temperature.
Liquid State- Vapour pressure, viscosity and surface tension (qualitative idea only, no mathematical derivations).
UNITVI : Thermodynamics
First law of thermodynamics-internal energy and enthalpy, heat capacity and specific heat, measurement of U and H,
Hess’s law of constant heat summation, enthalpy of : bond dissociation, combustion, formation, atomization,
sublimation, phase transition, ionization, solution and dilution.
Introduction of entropy as state function, Second law of thermodynamics, Gibbs energy change for spontaneous and
non-spontaneous process, criteria for equilibrium and spontaneity.
Third law of thermodynamics- Brief introduction.
UNIT VII: Equilibrium
Equilibrium in physical and chemical processes, dynamic nature of equilibrium, law of chemical equilibrium, equilibrium
constant, factors affecting equilibrium-Le Chatelier’s principle; ionic equilibrium- ionization of acids and bases, strong and
weak electrolytes, degree of ionization, ionization of polybasic acids, acid strength, concept of pH., Hydrolysis of salts
(elementary idea)., buffer solutions, Henderson equation, solubility product, common ion effect (with illustrative
UNIT VIII: Redox Reactions
Concept of oxidation and oxidation and reduction, redox reactions oxidation number, balancing redox reactions in terms
of loss and gain of electron and change in oxidation numbers.
UNIT IX: Hydrogen
Occurrence, isotopes, preparation, properties and uses of hydrogen; hydrides-ionic, covalent and interstitial; physical and
chemical properties of water, heavy water; hydrogen peroxide-preparation, reactions, uses and structure;
UNIT X: s-Block Elements (Alkali and Alkaline earth metals)
Group I and group 2 elements:
General introduction, electronic configuration, occurrence, anomalous properties of the first element of each group,
diagonal relationship, trends in the variation of properties (such as ionization enthalpy, atomic and ionic radii), trends in
chemical reactivity with oxygen, water, hydrogen and halogens; uses.
Preparation and Properties of Some important Compounds:
Sodium carbonate, sodium chloride, sodium hydroxide and sodium hydrogencarbonate, biological importance of sodium
and potassium.
Industrial use of lime and limestone, biological importance of Mg and Ca.
UNIT XI: Some p-Block Elements
General Introduction to p-Block Elements.
Group 13 elements: General introduction, electronic configuration, occurrence, variation of properties, oxidation states,
trends in chemical reactivity, anomalous properties of first element of the group; Boron, some important compounds:
borax, boric acids, boron hydrides. Aluminium: uses, reactions with acids and alkalies.
General 14 elements: General introduction, electronic configuration, occurrence, variation of properties, oxidation states,
trends in chemical reactivity, anomalous behaviour of first element. Carbon, allotropic forms, physical and chemical
properties: uses of some important compounds: oxides.
Important compounds of silicon and a few uses: silicon tetrachloride, silicones, silicates and zeolites, their uses.
UNIT XII: Organic Chemistry- Some Basic Principles and Techniques
General introduction, methods of purification qualitative and quantitative analysis, classification and IUPAC
nomenclature of organic compounds.
Electronic displacements in a covalent bond: inductive effect, electromeric effect, resonance and hyper conjugation.
Homolytic and heterolytic fission of a covalent bond: free radials, carbocations, carbanions; electrophiles and
nucleophiles, types of organic reactions.
UNIT XIII: Hydrocarbons
Alkanes- Nomenclature, isomerism, conformations (ethane only), physical properties, chemical reactions including free
radical mechanism of halogenation, combustion and pyrolysis.
Alkanes-Nomenclature, structure of double bond (ethene), geometrical isomerism, physical properties, methods of
preparation: chemical reactions: addition of hydrogen, halogen, water, hydrogen halides (Markovnikov’s addition and
peroxide effect), ozonolysis, oxidation, mechanism of electrophilic addition.
Alkynes-Nomenclature, structure of triple bond (ethyne), physical properties, methods of preparation, chemical
reactions: acidic character of alkynes, addition reaction of- hydrogen, halogens, hydrogen halides and water.
Aromatic hydrocarbons- Introduction, IUPAC nomenclature; Benzene; resonance, aromaticity; chemical properties:
mechanism of electrophilic substitution- Nitration sulphonation, halogenation, Friedel Craft’s alkylation and acylation;
directive influence of functional group in mono-substituted benzene; carcinogenicity and toxicity.
UNIT XIV: Environmental Chemistry
Environmental pollution: Air, water and soil pollution, chemical reactions in atmosphere, smogs, major atmospheric
pollutants; acid rain ozone and its reactions, effects of depletion of ozone layer, greenhouse effect and global warmingpollution
due to industrial wastes; green chemistry as an alternative tool for reducing pollution, strategy for control of
environmental pollution.
UNIT I: Solid State
Classification of solids based on different binding forces; molecular, ionic covalent and metallic solids, amorphous and
crystalline solids (elementary idea), unit cell in two dimensional and three dimensional lattices, calculation of density of
unit cell, packing in solids, packing efficiency, voids, number of atoms per unit cell in a cubic unit cell, point defects,
electrical and magnetic properties, Band theory of metals, conductors, semiconductors and insulators.
UNIT II: Solutions
Types of solutions, expression of concentration of solutions of solids in liquids, solubility of gases in liquids, solid
solutions, colligative properties- relative lowering of vapour pressure, Raoult’s law, elevation of boiling point, depression
of freezing point, osmotic pressure, determination of molecular masses using colligative properties abnormal molecular
mass. Van Hoff factor.
UNIT III: Electrochemistry
Redox reactions, conductance in electrolytic solutions, specific and molar conductivity variation of conductivity with
concentration, kohlrausch’s Law, electrolysis and Laws of electrolysis (elementary idea), dry cell- electrolytic cells and
Galvanic cells; lead accumulator, EMF of a cell, standard electrode potential, Relation between Gibbs energy change and
EMF of a cell, fuel cells; corrosion.
UNIT IV: Chemical Kinetics
Rate of a reaction (average and instantaneous), factors affecting rates of reaction; concentration, temperature, catalyst;
order and molecularity of a reaction; rate law and specific rate constant, integrated rate equations and half life (only for
zero and first order reactions); concept of collision theory ( elementary idea, no mathematical treatment). Activation
energy, Arrhenious equation.
UNIT V: Surface Chemistry
Adsorption-physisorption and chemisorption; factors affecting adsorption of gases on solids, catalysis homogeneous and
heterogeneous, activity and selectivity: enzyme catalysis; colloidal state: distinction between true solutions, colloids and
suspensions; lyophillic, lyophobic multimolecular and macromolecular colloids; properties of colloids; Tyndall effect,
Brownian movement, electrophoresis, coagulation; emulsions- types of emulsions.
UNIT VI: General Principles and Processes of Isolation of Elements
Principles and methods of extraction- concentration, oxidation, reduction electrolytic method and refining; occurrence
and principles of extraction of aluminium, copper, zinc and iron.
UNIT VII: p- Block Elements
Group 15 elements: General introduction, electronic configuration, occurrence, oxidation states, trends in physical and
chemical properties; preparation and properties of ammonia and nitric acid, oxides of nitrogen (structure only);
Phosphorous- allotropic forms; compounds of phosphorous: preparation and properties of phosphine, halides (PCI3
, PCI5
and oxoacids (elementary idea only).
Group 16 elements: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and
chemical properties; dioxygen: preparation, properties and uses; classification of oxides; ozone. Sulphur – allotropic
forms; compounds of sulphur: preparation, preparation, properties and uses of sulphur dioxide; sulphuric acid: industrial
process of manufacture, properties and uses, oxoacids of sulphur (structures only).
Group 17 elements: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and
chemical properties; compounds of halogens: preparation, properties and uses of chlorine and hydrochloric acid,
interhalogen compounds oxoacids of halogens (structures only).
Group 18 elements: General introduction, electronic configuration, occurrence, trends in physical and chemical
properties, uses.
UNIT VIII: d and f Block Elements
General introduction, electronic configuration, characteristics of transition metals, general trends in properties of the
first row transition metals- metallic character, ionization enthalpy, oxidation states, ionic radii, colour, catalytic property,
magnetic properties, interstitial compounds, alloy formation. Preparation and properties of K2Cr2O7 and KMnO4.
Lanthanoids- electronic configuration, oxidation states, chemical reactivity, and lanthanoid contraction and its
Actinoids: Electronic configuration, oxidation states and comparison with lanthanoids.
UNIT IX: Coordination Compounds
Coordination compounds: Introduction, ligands, coordination number, colour, magnetic properties and shapes, IUPAC
nomenclature of mononuclear coordination compounds, isomerism (structural and stereo) bonding, Werner’s theory
VBT,CFT; importance of coordination compounds (in qualitative analysis, biological systems).
UNIT X: Haloalkanes and Haloarenes
Haloalkanes: Nomenclature, nature of C –X bond, physical and chemical properties, mechanism of substitution reactions.
Optical rotation.
Haloarenes: Nature of C-X bond, substitution reactions (directive influence of halogen for monosubstituted compounds
Uses and environment effects of – dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons, DDT.
UNIT XI: Alcohols, Phenols and Ethers
Alcohols: Nomenclature, methods of preparation, physical and chemical properties (of primary alcohols only);
identification of primary, secondary and tertiary alcohols; mechanism of dehydration, uses with special reference to
methanol and ethanol.
Phenols: Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol, electrophillic
substitution reactions, uses of phenols.
Ethers: Nomenclature, methods of preparation, physical and chemical properties uses.
UNIT XII: Aldehydes, Ketones and Carboxylic Acids
Aldehydes and Ketones: Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical
properties; and mechanism of nucleophilic addition, reactivity of alpha hydrogen in aldehydes; uses.
Carboxylic Acids: Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses.
UNIT XIII: Organic Compounds Containing Nitrogen
Amines: Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses,
identification of primary secondary and tertiary amines.
Cyanides and Isocyanides- will be mentioned at relevant places.
Diazonium salts: Preparation, chemical reactions and importance in synthetic organic chemistry.
UNIT XIV: Biomolecules
Carbohydrates- Classification (aldoses and ketoses), monosaccharide (glucose and fructose), D.L. configuration,
oligosaccharides (sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen): importance.
Proteins- Elementary idea of – amino acids, peptide bond, polypeptides, proteins, primary structure, secondary
structure, tertiary structure and quaternary structure (qualitative idea only), denaturation of proteins; enzymes.
Hormones- Elementary idea (excluding structure).
Vitamins- Classification and function.
Nucleic Acids: DNA and RNA
UNIT XV: Polymers
Classification- Natural and synthetic, methods of polymerization (addition and condensation), copolymerization. Some
important polymers: natural and synthetic like polyesters, bakelite; rubber, Biodegradable and non-biodegradable
UNIT XVI: Chemistry in Everyday Life
Chemicals in medicines- analgesics, tranquilizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics,
antacids, antihistamines.
Chemicals in food- preservatives, artificial sweetening agents, elementary idea of antioxidants.
Cleansing agents- soaps and detergents, cleansing action.

3. Biology - AIPMT Syllabus 2016 for Biology
UNIT I: Diversity in Living World
What is living? ; Biodiversity; Need for classification; Three domains of life; Taxonomy & Systematics; Concept of
species and taxonomical hierarchy; Binomial nomenclature; Tools for study of Taxonomy – Museums, Zoos, Herbaria,
Botanical gardens.
Five kingdom classification; salient features and classification of Monera; Protista and Fungi into major groups; Lichens;
Viruses and Viroids.
Salient features and classification of plants into major groups-Algae, Bryophytes, Pteridophytes, Gymnosperms and
Angiosperms (three to five salient and distinguishing features and at least two examples of each category); Angiospermsclassification
up to class, characteristic features and examples).
Salient features and classification of animals-nonchordate up to phyla level and chordate up to classes level (three to five
salient features and at least two examples).
UNIT II: Structural Organisation in Animals and Plants
Morphology and modifications; Tissues; Anatomy and functions of different parts of flowering plants: Root, stem, leaf,
inflorescence- cymose and recemose, flower, fruit and seed (To be dealt along with the relevant practical of the Practical
Animal tissues; Morphology, anatomy and functions of different systems (digestive, circulatory, respiratory, nervous and
reproductive) of an insect (cockroach). (Brief account only)
UNIT III: Cell Structure and Function
Cell theory and cell as the basic unit of life; Structure of prokaryotic and eukaryotic cell; Plant cell and animal cell; Cell
envelope, cell membrane, cell wall; Cell organelles-structure and function; Endomembrane system-endoplasmic reticulum,
Golgi bodies, lysosomes, vacuoles; mitochondria, ribosomes, plastids, micro bodies; Cytoskeleton, cilia, flagella,
centrioles (ultra structure and function); Nucleus-nuclear membrane, chromatin, nucleolus.
Chemical constituents of living cells: Biomolecules-structure and function of proteins, carbodydrates, lipids, nucleic acids;
Enzymes-types, properties, enzyme action.
B Cell division: Cell cycle, mitosis, meiosis and their significance.
UNIT IV: Plant Physiology
Transport in plants: Movement of water, gases and nutrients; Cell to cell transport-Diffusion, facilitated diffusion, active
transport; Plant – water relations – Imbibition, water potential, osmosis, plasmolysis; Long distance transport of water –
Absorption, apoplast, symplast, transpiration pull, root pressure and guttation; Transpiration-Opening and closing of
stomata; Uptake and translocation of mineral nutrients-Transport of food, phloem transport, Mass flow hypothesis;
Diffusion of gases (brief mention).
Mineral nutrition: Essential minerals, macro and micronutrients and their role; Deficiency symptoms; Mineral toxicity;
Elementary idea of Hydroponics as a method to study mineral nutrition; Nitrogen metabolism-Nitrogen cycle, biological
nitrogen fixation.
Photosynthesis: Photosynthesis as a means of Autotrophic nutrition; Site of photosynthesis take place; pigments involved
in Photosynthesis (Elementary idea); Photochemical and biosynthetic phases of photosynthesis; Cyclic and non cyclic and
photophosphorylation; Chemiosmotic hypothesis; Photorespiration C3 and C4 pathways; Factors affecting photosynthesis.
Respiration: Exchange gases; Cellular respiration-glycolysis, fermentation (anaerobic), TCA cycle and electron transport
system (aerobic); Energy relations-Number of ATP molecules generated; Amphibolic pathways; Respiratory quotient.
Plant growth and development: Seed germination; Phases of Plant growth and plant growth rate; Conditions of growth;
Differentiation, dedifferentiation and redifferentiation; Sequence of developmental process in a plant cell; Growth
regulators-auxin,gibberellin, cytokinin, ethylene, ABA; Seed dormancy; Vernalisation; Photoperiodism.
UNIT IV: Human Physiology
Digestion and absorption; Alimentary canal and digestive glands; Role of digestive enzymes and gastrointestinal hormones;
Peristalsis, digestion, absorption and assimilation of proteins, carbohydrates and fats; Caloric value of proteins, carbohydrates
and fats; Egestion; Nutritional and digestive disorders – PEM, indigestion, constipation, vomiting, jaundice, diarrhea.
Breathing and Respiration: Respiratory organs in animals (recall only); Respiratory system in humans; Mechanism of breathing
and its regulation in humans-Exchange of gases, transport of gases and regulation of respiration Respiratory volumes; Disorders
related to respiration-Asthma, Emphysema, Occupational respiratory disorders.
Body fluids and circulation: Composition of blood, blood groups, coagulation of blood; Composition of lymph and its function;
Human circulatory system-Structure of human heart and blood vessels; Cardiac cycle, cardiac output, ECG, Double circulation;
Regulation of cardiac activity; Disorders of circulatory system-Hypertension, Coronary artery disease, Angina pectoris, Heart
Excretory products and their elimination: Modes of excretion- Ammonotelism, ureotelism, uricotelism; Human excretory
system-structure and fuction; Urine formation, Osmoregulation; Regulation of kidney function-Renin-angiotensin, Atrial
Natriuretic Factor, ADH and Diabetes insipidus; Role of other organs in excretion; Disorders; Uraemia, Renal failure, Renal
calculi, Nephritis; Dialysis and artificial kidney.
Locomotion and Movement: Types of movement- ciliary, fiagellar, muscular; Skeletal muscle- contractile proteins and muscle
contraction; Skeletal system and its functions (To be dealt with the relevant practical of Practical syllabus); Joints; Disorders of
muscular and skeletal system-Myasthenia gravis, Tetany, Muscular dystrophy, Arthritis, Osteoporosis, Gout.
Neural control and coordination: Neuron and nerves; Nervous system in humans- central nervous system, peripheral nervous
system and visceral nervous system; Generation and conduction of nerve impulse; Reflex action; Sense organs; Elementary
structure and function of eye and ear.
Chemical coordination and regulation: Endocrine glands and hormones; Human endocrine system-Hypothalamus, Pituitary,
Pineal, Thyroid, Parathyroid, Adrenal, Pancreas, Gonads; Mechanism of hormone action (Elementary Idea); Role of hormones as
messengers and regulators, Hypo-and hyperactivity and related disorders (Common disorders e.g. Dwarfism, Acromegaly,
Cretinism, goiter, exopthalmic goiter, diabetes, Addison’s disease).
(Imp: Diseases and disorders mentioned above to be dealt in brief.)
UNIT I: Reproduction
Reproduction in organisms: Reproduction, a characteristic feature of all organisms for continuation of species; Modes of
reproduction – Asexual and sexual; Asexual reproduction; Modes-Binary fission, sporulation, budding, gemmule,
fragmentation; vegetative propagation in plants.
Sexual reproduction in flowering plants: Flower structure; Development of male and female gametophytes; Pollinationtypes,
agencies and examples; Outbreeding devices; Pollen-Pistil interaction; Double fertilization; Post fertilization eventsDevelopment
of endosperm and embryo, Development of seed and formation of fruit; Special modes-apomixis,
parthenocarpy, polyembryony; Significance of seed and fruit formation.
Human Reproduction: Male and female reproductive systems; Microscopic anatomy of testis and ovary; Gametogenesisspermatogenesis
& oogenesis; Menstrual cycle; Fertilisation, embryo development upto blastocyst formation, implantation;
Pregnancy and placenta formation (Elementary idea); Parturition (Elementary idea); Lactation (Elementary idea).
Reproductive health: Need for reproductive health and prevention of sexually transmitted diseases (STD); Birth controlNeed
and Methods, Contraception and Medical Termination of Pregnancy (MTP); Amniocentesis; Infertility and assisted
reproductive technologies – IVF, ZIFT, GIFT (Elementary idea for general awareness).
UNIT II: Genetics and Evolution
Heredity and variation: Mendelian Inheritance; Deviations from Mendelism-Incomplete dominance, Co-dominance,
Multiple alleles and Inheritance of blood groups, Pleiotropy; Elementary idea of polygenic inheritance; Chromosome
theory of inheritance; Chromosomes and genes; Sex determination-In humans, birds, honey bee; Linkage and crossing
over; Sex linked inheritance-Haemophilia, Colour blindness; Mendelian disorders in humans-Thalassemia; Chromosomal
disorders in humans; Down’s syndrome, Turner’s and Klinefelter’s syndromes.
Molecular basis of Inheritance: Search for genetic material and DNA as genetic material; Structure of DNA and RNA;
DNA packaging; DNA replication; Central dogma; Transcription, genetic code, translation; Gene expression and
regulation-Lac Operon; Genome and human genome project; DNA finger printing.
Evolution: Origin of life; Biological evolution and evidences for biological evolution from Paleontology, comparative
anatomy, embryology and molecular evidence); Darwin’s contribution, Modern Synthetic theory of Evolution; Mechanism
of evolution-Variation (Mutation and Recombination) and Natural Selection with examples, types of natural selection;
Gene flow and genetic drift; Hardy-Weinberg’s principle; Adaptive Radiation; Human evolution.
UNIT III: Biology and Human Welfare
Health and Disease; Pathogens; parasites causing human diseases (Malaria, Filariasis, Ascariasis. Typhoid, Pneumonia,
common cold, amoebiasis, ring worm); Basic concepts of immunology-vaccines; Cancer, HIV and AIDS; Adolescence,
drug and alcohol abuse.
Improvement in food production; Plant breeding, tissue culture, single cell protein, Biofortification; Apiculture and Animal
Microbes in human welfare: In household food processing, industrial production, sewage treatment, energy generation and
as biocontrol agents and biofertilizers.
UNIT IV: Biotechnology and Its Applications
Principles and process of Biotechnology: Genetic engineering (Recombinant DNA technology).
Application of Biotechnology in health and agriculture: Human insulin and vaccine production, gene therapy; Genetically
modified organisms-Bt crops; Transgenic Animals; Biosafety issues-Biopiracy and patents.
UNIT V: Ecology and environment
Organisms and environment: Habitat and niche; Population and ecological adaptations; Population interactions-mutualism,
competition, predation, parasitism; Population attributes-growth, birth rate and death rate, age distribution.
Ecosystem: Patterns, components; productivity and decomposition; Energy flow; Pyramids of number, biomass, energy;
Nutrient cycling (carbon and phosphorous); Ecological succession; Ecological Services-Carbon fixation, pollination,
oxygen release.
Biodiversity and its conservation: Concept of Biodiversity; Patterns of Biodiversity; Importance of Biodiversity; Loss of
Biodiversity; Biodiversity conservation; Hotspots, endangered organisms, extinction, Red Data Book, biosphere reserves,
National parks and sanctuaries.
Environmental issues: Air pollution and its control; Water pollution and its control; Agrochemicals and their effects; Solid
waste management; Radioactive waste management; Greenhouse effect and global warning; Ozone depletion;
Deforestation; Any three case studies as success stories addressing environmental issues.

Apply for AIPMT 2016